TONES TIES LTD   

SITEMAP

Telephone 0845 372 5566  Fax 01622 630180

Email sales@tonesties.co.uk

Deck Ceiling Fixings and Hangers

Wedge nuts also known as V nuts and wedge fixings design for the pre formed channels in concrete and steel ribbed ceilings. This type of ceiling is used widely in construction of commercial buildings and this range of E klips fixings simply slot into the V or wedge channel allowing threaded rod to be hung and fitted or conduits and pipes to be clipped into place. Also there are fixings for the corrugated steel ceilings where you can drill or there are pre punched holes then the brackets are clipped into place so chains and studding can be hung and fitted. We supply the complete E-Klips range and if you cannot find what you are looking for please give us a call at Tones Ties, we can send you a complete catalogue or you can find the entire girder clip range at thesitebox.com.

Wedge Nut ( V Nut )

Wedge nut or V nut designed to fit into the channel on a ribbed ceiling to give a threaded fixing. Material type F1 = Electroplated zinc.

Ceiling Channel Wedge Nut

Wedge nut to slot into ceiling channels giving a threaded fixing for bolts or studding. Material type F1 = Electroplated zinc.

Chain Hanger

Chain hanger for corrugated steel ceilings clip fixing into 7mm hole then fix to the hanging tab. Material type F8 = Mechanically galvanised.

Deck Clip

Deck clip fit into the ceiling groove and then conduits and pipes can be clipped in place. Material type F8 = Mechanically galvanised.

Ribbed Deck

Ribbed deck to stud fitting designed to hang from the underside of the deck. Material type F8 = Mechanically galvanised.

Corrugated Ceiling Hanger

Corrugated ceiling hanger fix to holes in deck and then threaded rod can be hung and fix to. Material type F8 = Mechanically galvanised.

Send mail to sales@tonesties.co.uk with questions or comments about this web site.